HICTOP Hotend Compatible for Anycubic Chiron 3D Printer 24V 40W
Anycubic Chiron 24V hotend
$12.19 $13.79
- 1.The HICTOP chiron hotend is compatible for Anycubic chiron 3D printer
- 2.The hotend is full assembled with 24V 40W cartridge heater, NTC3950 thermistor and aluminum heating block, the temperature can reach up to 250℃.
- 3.HICTOP chiron hotend type: V5
- 4.Nozzle diameter: 0.4mm, you can change it to other sizes you like
- 5.Both of the thermistor and the heater carriage come with connectors, plug and play
Specification:
Hotend Type: V5;
Cartridge Heater: 24V 40W;
Nozzle diameter: 0.4mm;
PTFE Tube: ID 2mm, OD 4mm, Length: 50cm;
Thermistor: NTC 100K
Package included: 1 piece 24V full assembled HICTOP hotend compatible for Anycubic chiron 3D printer
Related Items
Artillery All-in-one Single Extruder Kit Replacement Extrusion Kit for Sidewinder X1 3D Printer
$49.79 $57.00
1.Original replacement for Artillery Sidewinder X1 ( V2, V3, V4 but not V1) 3D printer
2.Easy to exchange: Just pull out the ribbon cable, undo 3 bolts, remove one head, replace it with another, 3 bolts back on, ribbon cable back in its slot, re-level
3 It is a complete upgraded hot end for the Artillery Sidewinder X1, it's all there with a quilting motor, thermistor, heater cartridge, circuit board, LED circuit board, complete hotend, and heating sock.
4.Direct drive extruder, great support for flexible filament.
5 The PCB on V1 is a little bit different, so it does not compatible with that version, V2, V3, V4 all are OK, please feel free to purchase.
Package Including
1 x Replacement Extrusion Kit for Artillery Sidewinder X1 3D Printer ( V2, V3, V4)
"
Artillery All-in-one Single Extruder Kit Replacement Extrusion Kit for Sidewinder X2 and Genius Pro 3D Printer
$49.00
- 1.Original replacement for Artillery Sidewinder X2 and Genius Pro 3D printer
- 2.The Sidewinder X2 Extrusion Replacement Kit comes with Auto bed leveling sensor.
- 3.Easy to exchange: Just pull out the ribbon cable, undo 3 bolts, remove one head, replace it with another, 3 bolts back on, ribbon cable back in it's slot, re-level
- 4.It is a complete upgraded hot end for the Artillery Sidewinder X2 & Genius Pro, it's all there with a quilting motor, thermistor, heater cartridge, circuit board, LED circuit board, complete hotend and heating sock.
- 5.Direct drive extruder, great support for flexible filament.
Feature:
An all-in-one single-nozzle extruder suitable for Sidewinder X2 and Genius Pro 3D printers.
Direct drive extruder, strong support for flexible filament.
Dedicated connector, one cable connection, convenient and clean.
Stable operation and good heat dissipation effect.
One-piece design, easy to install, 3 screws can be completed.
Specification:
Nozzle diameter: 0.4mm
Applicable models: suitable for Sidewinder X2 and Genius Pro
Packing list:
1* Replacement Extrusion Kit for Artillery Sidewinder X2 and Genius Pro 3D Printer(with auto level sensor)
Creality CR-10 Heated Bed 310x310x3mm 12V Aluminum Hot Bed with Cable and Insulation Mat Compatible for Creality CR-10 / CR-10S 3D Printers
$32.99 $37.00
- CR-10 Heated Bed: 12V, 18A, 220W
- It is compatible with Creality CR-10 / CR-10S 3D printers
- Size of the CR-10 hot bed : 310x310x3mm
- Hotbed cable and Insulation Mat are included in this package
- Plug and Play, it is easy to install
Specifications:
Product process: Aluminum Substrate
Size: 310x310x3mm
Voltage: 12V
Power: 220W
Package included: 1 × Creality CR-10/CR-10S heated bed 310x310x3mm With Cable
Creality Ender 3 Heated Bed with Cable 24V 220W Compatible with Creality Ender 3, Ender 3 Neo, Ender 3 pro, Ender 3 V2, Endder 3 V2 Neo, Voxelab Aquila X2 3D Printers
$21.90 $24.79
- Ender 3 heated bed size: 235X235X3mm
- Ender 3 replacement bed power: DC 24V 220W
- This 3d printer heated bed is compatible with Creality Ender 3, Ender 3 Neo, Ender 3 pro, Ender 3 V2, Endder 3 V2 Neo, Voxelab Aquila X2 3D printers
- Material of the ender 3 hot bed: Aluminum
- Max temperature of the 3d printer heated bed: 110 C degree
Specifications:
HICTOP Ender 3 Heated Bed with Cable 24V 220W Compatible with Creality Ender 3, Ender 3 Neo, Ender 3 pro, Ender 3 V2, Endder 3 V2 Neo, Voxelab Aquila X2 3D printers
Material: Aluminum
Heated Bed Size: 235x235x3mm
Voltage: 24V
Power: 220W
Color: Black
Package included: 1 × Ender 3 Heated Bed with Cable 24V 220W Compatible with Creality Ender 3, Ender 3 pro, Ender 3 V2 3D printers