HICTOP Flexible Steel Platform with PEI Sheet Surface and Magnetic bottom sheet with Adhesive for 3D printers
J9910004-220
$19.50
Description:
1 The HICTOP PEI sheet is combined with 2 parts, a flexible steel platform coated with PEI surface and a magnetic bottom sheet with 3M 9448A adhesive on the back. The PEI comes pre-applied.
2 The HICTOP PEI sheet is very easy to use, simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top. The maximum temperature for printing is 120℃ on the bed.
3 Excellent adhesion can be achieved when the temperature of the heated bed is about 60℃, you can print directly on the HICTOP PEI sheet without using any glue or other tools to help the model stick onto the sheet. You do not need to worry about the prints curling at a 60℃ bed temperature. And if you want to print PETG you may need to set the hotbed 80-85 ℃.
4 Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it.
There are different sizes for them:
220x220mm（8.668.66inch) it is applicable with Anet A8 Wanhao Duplicator i3 Monoprice Maker and other same size printers.
235*235mm（9.25*9.25inch）it is applicable with Creality 3D printers such as Ender-3 Pro, Ender-3 V2，Ender-3, Ender-3S, Ender-3X, Ender-5, Ender-5 Pro，CR-20, CR-20 Pro and other same size printers. Please notice that the hotbed sizes for them are 235*235mm but not 220*220mm.
310x310mm（12.2x12.2inch) it is applicable with Creality CR-10, CR-10S, and other same-size printers.
310x320mm（12.2x12.2inch) it is applicable with Creality CR-10S Pro v2, ender 3 max, and other same size printers.
410*410mm（16.1*16.1inch）, it is applicable with Creality 3D printer such as Creality CR-10 S4/CR-6 Max and other same size 3D Printers
Package included: 1 x Steel platform with PEI flexible surface
1 x Magnetic bottom sheet with Adhesive
Related Items
Artillery All-in-one Single Extruder Kit Replacement Extrusion Kit for Sidewinder X1 3D Printer
$49.79 $57.00
1.Original replacement for Artillery Sidewinder X1 ( V2, V3, V4 but not V1) 3D printer
2.Easy to exchange: Just pull out the ribbon cable, undo 3 bolts, remove one head, replace it with another, 3 bolts back on, ribbon cable back in its slot, re-level
3 It is a complete upgraded hot end for the Artillery Sidewinder X1, it's all there with a quilting motor, thermistor, heater cartridge, circuit board, LED circuit board, complete hotend, and heating sock.
4.Direct drive extruder, great support for flexible filament.
5 The PCB on V1 is a little bit different, so it does not compatible with that version, V2, V3, V4 all are OK, please feel free to purchase.
Package Including
1 x Replacement Extrusion Kit for Artillery Sidewinder X1 3D Printer ( V2, V3, V4)
"
Artillery All-in-one Single Extruder Kit Replacement Extrusion Kit for Sidewinder X2 and Genius Pro 3D Printer
$49.00
- 1.Original replacement for Artillery Sidewinder X2 and Genius Pro 3D printer
- 2.The Sidewinder X2 Extrusion Replacement Kit comes with Auto bed leveling sensor.
- 3.Easy to exchange: Just pull out the ribbon cable, undo 3 bolts, remove one head, replace it with another, 3 bolts back on, ribbon cable back in it's slot, re-level
- 4.It is a complete upgraded hot end for the Artillery Sidewinder X2 & Genius Pro, it's all there with a quilting motor, thermistor, heater cartridge, circuit board, LED circuit board, complete hotend and heating sock.
- 5.Direct drive extruder, great support for flexible filament.
Feature:
An all-in-one single-nozzle extruder suitable for Sidewinder X2 and Genius Pro 3D printers.
Direct drive extruder, strong support for flexible filament.
Dedicated connector, one cable connection, convenient and clean.
Stable operation and good heat dissipation effect.
One-piece design, easy to install, 3 screws can be completed.
Specification:
Nozzle diameter: 0.4mm
Applicable models: suitable for Sidewinder X2 and Genius Pro
Packing list:
1* Replacement Extrusion Kit for Artillery Sidewinder X2 and Genius Pro 3D Printer(with auto level sensor)
Creality CR-10 Heated Bed 310x310x3mm 12V Aluminum Hot Bed with Cable and Insulation Mat Compatible for Creality CR-10 / CR-10S 3D Printers
$32.99 $37.00
- CR-10 Heated Bed: 12V, 18A, 220W
- It is compatible with Creality CR-10 / CR-10S 3D printers
- Size of the CR-10 hot bed : 310x310x3mm
- Hotbed cable and Insulation Mat are included in this package
- Plug and Play, it is easy to install
Specifications:
Product process: Aluminum Substrate
Size: 310x310x3mm
Voltage: 12V
Power: 220W
Package included: 1 × Creality CR-10/CR-10S heated bed 310x310x3mm With Cable
Creality Ender 3 Heated Bed with Cable 24V 220W Compatible with Creality Ender 3, Ender 3 Neo, Ender 3 pro, Ender 3 V2, Endder 3 V2 Neo, Voxelab Aquila X2 3D Printers
$21.90 $24.79
- Ender 3 heated bed size: 235X235X3mm
- Ender 3 replacement bed power: DC 24V 220W
- This 3d printer heated bed is compatible with Creality Ender 3, Ender 3 Neo, Ender 3 pro, Ender 3 V2, Endder 3 V2 Neo, Voxelab Aquila X2 3D printers
- Material of the ender 3 hot bed: Aluminum
- Max temperature of the 3d printer heated bed: 110 C degree
Specifications:
HICTOP Ender 3 Heated Bed with Cable 24V 220W Compatible with Creality Ender 3, Ender 3 Neo, Ender 3 pro, Ender 3 V2, Endder 3 V2 Neo, Voxelab Aquila X2 3D printers
Material: Aluminum
Heated Bed Size: 235x235x3mm
Voltage: 24V
Power: 220W
Color: Black
Package included: 1 × Ender 3 Heated Bed with Cable 24V 220W Compatible with Creality Ender 3, Ender 3 pro, Ender 3 V2 3D printers