Hotend P1, P2 for HICTOP D3 hero(Tenlog D3 pro) 3D printer

Artillery All-in-one Single Extruder Kit Replacement Extrusion Kit for Sidewinder X1 3D Printer

$52.79 $54.00

1.Original replacement for Artillery Sidewinder X1 ( V2, V3, V4 but not V1) 3D printer  

2.Easy to exchange: Just pull out the ribbon cable, undo 3 bolts, remove one head, replace it with another, 3 bolts back on, ribbon cable back in its slot, re-level

3 It is a complete upgraded hot end for the Artillery Sidewinder X1,  it's all there with a quilting motor, thermistor, heater cartridge, circuit board, LED circuit board, complete hotend, and heating sock.

4.Direct drive extruder, great support for flexible filament.

5 The PCB on V1 is a little bit different, so it does not compatible with that version, V2, V3, V4 all are OK, please feel free to purchase.

Package Including

1 x Replacement Extrusion Kit for Artillery Sidewinder X1 3D Printer ( V2, V3, V4)

"

View full product details »

Athorbot Couple kit upgraded for CR-10, CR-10S，HICTOP, Anet 3D Printers

$150.00

Print Resolution: 

Nozzle: 0.5mm 2 in 1 out nozzle 

What's in the Box: 
• 1 x Nozzle suit (12V)

• 1 x Nozzle suit (24V) 
• 2 x extruder motors
• 1 x Filament spool holder units 
• 1 x Tools

• 1 x CD (manual and applications)

For CR10, Anet, it requires to order one 2004 LCD Screen and Athorbot Board (12V). Change the heater to 12V kits.

Product features

• Mixed color: Upload the "Athorbot mix" firmware and it provides different functions to make mixing color by changing the mixing percentage on the LCD screen. Percentage 100 and 0 means single color.
• Dual-color: Upload the "Athorbot dual" firmware and it helps you to print samples with two different colors. Single color is also supported by this firmware.
• Graded color: Upload the "Athorbot mix" firmware and you can print samples with graded color by changing the mixing percentage on the LCD screen.
• VIP membership is guaranteed to get plenty of tutorials and 3D printing applications. Free troubleshooting and webinars are available every month. This DIY 3D printer is guaranteed for one year warranty. is 1-year technical support is guaranteed. Quality Assurance/Technical Assistance at athorbot.com| Email at support@athorbot.com | Live chat Skype: ghj205 Mon through Fri 6 am - 5 pm PST.

Description

New Brand on Amazon but a long history of being a 3D printer manufacturer

Athorbot is a new brand in the 3D printer market. But we have been a 3D printer manufacturer for more than 3 years.

We have a Couple serial:

1. Couple kit: Only 2-in-1 nozzle, two extruder motors that can be used to upgrade different DIY3D printers, such as CR-10, CR-10S, HICTOP, Anet E10, Anet A8, Anycubic3D printers, etc.
2. Couple Buddy: Half-assembled with all METAL FRAME.
3. Couple M10: Self-assembled (DIY) with ALUMINUM FRAME.
4. Couple M20: Half-assembled with all Aluminum FRAME.

All couple series can print: Mixed color, dual color, graded color, and single color. 

View full product details »

HICTOP 100K ohm NTC 3950 Thermistors/Temp Sensor for Reprap Creality Ender 3, Ender 3 Pro, CR-10 10S 3D Printer (Pack of 5)

$8.99 $9.99

View full product details »

HICTOP 3 Pieces Cartridge Heater 12V/40W and 24V/40W for 3D Printer Prusa Mendel

$8.99

View full product details »